Profession electrician for lighting and lighting networks. Electrician for lighting and lighting networks Electrician for lighting and lighting fixtures

Unified Tariff and Qualification Directory of Works and Professions of Workers (ETKS), 2019
Issue No. 3 ETKS
The issue was approved by the Order of the Ministry of Health and Social Development of the Russian Federation dated April 6, 2007 N 243
(as amended by: Orders of the Ministry of Health and Social Development of the Russian Federation of November 28, 2008 N 679, of April 30, 2009 N 233)

Electrician for lighting and lighting networks

§ 422. Electrician for lighting and lighting networks of the 2nd category

Job Description. Installation and sealing of fasteners for lighting wiring (screws, screws, rollers). Installation of brackets, hooks, structures. Removing the upper jute cover of the cable by hand. Production of small fasteners and gaskets that do not require precise dimensions. Coloring of earthing bars and cables. Shelter of cable in trenches and channels. Punching nests, holes and furrows according to the finished marking manually.

Must know: main brands of wires and cables; range of non-ferrous and ferrous metals; basic materials used in the manufacture and installation of electrical structures; main types of fasteners and small structures; the main types of tools used in electrical work; simple electrical wiring diagrams.

§ 423. Electrician for lighting and lighting networks of the 3rd category

Job Description. Cable cutting up to 10 kV with temporary termination of the ends. Installation of dowels. Charging and installation of all types of lamps up to 6 lamps (except fluorescent), switches, switches and sockets. Seal of passages for all types of wiring through walls and ceilings. Rolling wires with the installation of drums. Installation of grounding networks and zeroing devices. Dismantling of wiring in insulating tubes, transfers and bends. Dismantling of simple devices and devices (support insulators, switches, knife switches and lever-operated switches, fuses, rheostats, current and voltage transformers, etc.). Punching nests and holes with a mechanized tool. Laying temporary lighting wiring. Installation of single-column poles and outdoor lighting brackets with reinforcement and installation of insulators. Installation of junction boxes for cables and wires.

Must know: main types of supporting structures and fittings; the device of simple devices, electric devices, lamps; the device of the applied electrified and pneumatic tool and the rules for using it; simple electrical wiring diagrams; device and methods of using simple rigging means; types of welding equipment used in electrical work, and rules for using it; methods of installation and dismantling of temporary lighting wiring.

§ 424. Electrician for lighting and lighting networks of the 4th category

Job Description. Connection, termination, connection and laying of wires, cores of cables of various brands with a cross section of up to 70 mm2 by all methods, except for welding. Installation of protective devices, casings and fences. Marking of laid pipes, cables and bends. Fastening structures and devices using mounting guns. Crimping of tips and connection of pipes with the help of presses. Welding of tips to conductors of cables and wires. Installation of staples and metal support structures. Fastening structures by gluing. Installation of structures for cable wiring. Laying of steel and plastic pipes in furrows, on floors, walls, trusses and columns. Laying cable trays and perforated mounting profiles. Laying of wires in pipes of all types (except wiring in hazardous areas). Laying of metal sleeves. Charging and installation of lamps with from 7 to 12 lamps, fluorescent lamps up to 4 lamps, various types of water and dust protection fittings. Installation of searchlights, signal devices and devices. Laying lighting cables. Installation of single boxes for mounting fluorescent lamps. Installation of three-phase sockets. Ringing of wires and cables.

Must know: bases of the device of the mounted electric equipment and networks; methods for measuring insulation resistance; electrical wiring diagrams; ways of connecting, terminating and connecting wires and cores of cables of all brands with a cross section of up to 70 mm2; methods of marking steel and plastic pipes, cables; rules for slinging and moving goods; device and methods of using mechanized rigging equipment; installation of mounting guns, presses for connecting pipes, rules for using and caring for them.

§ 425. Electrician for lighting and lighting networks of the 5th category

Job Description. Marking and laying of wires of various brands with a cross section of more than 70 mm2 (except for wiring in hazardous areas). Harvesting and installation of wiring on cables. Charging and installation of lamps with more than 12 lamps, brackets and fluorescent lamps with more than 4 lamps. Installation of nutritious and distributive panels and boards. Charging and installation of fixtures with mercury lamps. Installation of spotlights, lamps and boxes in blocks. Installation of pipes in blocks weighing up to 500 kg. Laying of wires and cables in bundles in boxes, trays and on strings. Taking measurements and drawing up sketches of wiring nodes.

Must know: methods of revision and verification of electrical equipment; ways of connecting, terminating and connecting wires and cores of cables of various brands with a cross section of more than 70 mm2; rules for marking the places of installation of supporting structures, equipment and routes for laying wires and cables; rules for making measurements and drawing up sketches of wiring assemblies for manufacturing at stands and in workshops; the order of phasing of the completed wiring; methods for checking completed electrical wiring diagrams; methods for testing control, signaling and automation devices.

§ 426. Electrician for lighting and lighting networks of the 6th category

Job Description. Route marking of internal and external lighting networks. Making measurements and drawing up sketches of pipeline routes and complex pipe layouts. Laying and testing of pipelines and wiring in an explosive area. Charging and installation of lamps in explosion-proof design and with ballasts. Installation of pipes in blocks weighing more than 500 kg.

Must know: methods of cutting and mounting high-voltage and control cables; designs of switchboards, consoles; electrical circuits of lighting networks; methods for checking and regulating electrical equipment; methods of mounting lighting wiring of various types; arrangement of electrical installations; technical conditions for putting objects into operation; rules for performing work in hazardous areas.

Job electrician of power and lighting networks vacancies electrician of power and lighting networks in Moscow. Vacancy electrician of power and lighting networks from a direct employer in Moscow job advertisements electrician of power and lighting networks Moscow, vacancies of recruitment agencies in Moscow, looking for a job electrician of power and lighting networks through recruitment agencies and from direct employers, vacancies electrician of power and lighting networks with work experience and without work experience. The site of announcements about part-time work and work Avito Moscow job vacancies electrician of power and lighting networks from direct employers.

Work in Moscow electrician of power and lighting networks

Site work Avito Moscow work fresh vacancies electrician of power and lighting networks. On our site you can find a highly paid job as an electrician of power and lighting networks. Look for a job as an electrician of power and lighting networks in Moscow, view vacancies on our job site - a job aggregator in Moscow.

Avito jobs Moscow

Job electrician of power and lighting networks on the site in Moscow, vacancies electrician of power and lighting networks from direct employers Moscow. Vacancies in Moscow without work experience and highly paid with work experience. Vacancies electrician of power and lighting networks for women.

A lighting and lighting network electrician is a worker in the field of operation and repair of housing and communal services, who is engaged in ensuring the correct operation of lighting and lighting networks in buildings.

Depending on the category, the range of work of an electrician in lighting and lighting networks for ETKS includes:

  • 2nd category: Installation and termination of fasteners for lighting wiring (screws, screws, rollers). Installation of brackets, hooks, structures. Removing the upper jute cover of the cable by hand. Production of small fasteners and gaskets that do not require precise dimensions. Coloring of earthing bars and cables. Shelter of cable in trenches and channels. Punching nests, holes and furrows according to the finished marking manually.
  • 3rd category: Cutting a cable with voltage up to 10 kV with temporary termination of the ends. Installation of dowels. Charging and installation of all types of lamps up to 6 lamps (except fluorescent), switches, switches and sockets. Seal of passages for all types of wiring through walls and ceilings. Rolling wires with the installation of drums. Installation of grounding networks and zeroing devices. Dismantling of wiring in insulating tubes, transfers and bends. Dismantling of simple devices and devices (support insulators, switches, knife switches and lever-operated switches, fuses, rheostats, current and voltage transformers, etc.). Punching nests and holes with a mechanized tool. Laying temporary lighting wiring. Installation of single-column poles and outdoor lighting brackets with reinforcement and installation of insulators. Installation of junction boxes for cables and wires.
  • 4th category: Connection, termination, connection and laying of wires, cores of cables of various brands with a cross section of up to 70 mm2 by all methods, except for welding. Installation of protective devices, casings and fences. Marking of laid pipes, cables and bends. Fastening structures and devices using mounting guns. Crimping of tips and connection of pipes with the help of presses. Welding of tips to conductors of cables and wires. Installation of staples and metal support structures. Fastening structures by gluing. Installation of structures for cable wiring. Laying of steel and plastic pipes in furrows, on floors, walls, trusses and columns. Laying cable trays and perforated mounting profiles. Laying of wires in pipes of all types (except wiring in hazardous areas). Laying of metal sleeves. Charging and installation of lamps with from 7 to 12 lamps, fluorescent lamps up to 4 lamps, various types of water and dust protection fittings. Installation of searchlights, signal devices and devices. Laying lighting cables. Installation of single boxes for mounting fluorescent lamps. Installation of three-phase sockets. Ringing of wires and cables.
  • 5th category: Marking and laying of wires of various brands with a cross section of more than 70 mm2 (except for wires in hazardous areas). Harvesting and installation of wiring on cables. Charging and installation of lamps with more than 12 lamps, brackets and fluorescent lamps with more than 4 lamps. Installation of nutritious and distributive panels and boards. Charging and installation of fixtures with mercury lamps. Installation of spotlights, lamps and boxes in blocks. Installation of pipes in blocks weighing up to 500 kg. Laying of wires and cables in bundles in boxes, trays and on strings. Taking measurements and drawing up sketches of wiring nodes.
  • 6th category: Marking the route of internal and external lighting networks. Making measurements and drawing up sketches of pipeline routes and complex pipe layouts. Laying and testing of pipelines and wiring in an explosive area. Charging and installation of lamps in explosion-proof design and with ballasts. Installation of pipes in blocks weighing more than 500 kg.

JOB DESCRIPTION

electrician for lighting and lighting networks of the 3rd category

1. General Provisions

1.1. This job description defines the functional, job duties, rights and responsibilities of the electrician for lighting and lighting networks of the 3rd category of the Steel Technologies division (hereinafter referred to as the Electrician for lighting and lighting networks of the 3rd category) OOR "Russian Union of Industrialists and Entrepreneurs" ( hereinafter the Institution).

1.2. A person who meets the following requirements for education and training is appointed to the position of an electrician for lighting and lighting networks of the 3rd category:

  • Vocational training - vocational training programs for the professions of workers, programs for retraining workers;

    • Special conditions for admission to work as an electrician in lighting and lighting networks of the 3rd category:

  • Certificate of admission to work at height (when performing work at height);
  • The presence of an electrical safety tolerance group, the level of which depends on the installation class;
  • Passing a fire safety briefing;
  • Passing mandatory preliminary (when applying for a job) and periodic medical examinations (examinations), as well as extraordinary medical examinations (examinations) in accordance with the procedure established by the legislation of the Russian Federation;
  • Passing briefings on labor protection in accordance with the procedure established by the legislation of the Russian Federation;

    • 1.3. Electrician for lighting and lighting networks of the 3rd category must know:

  • Name, purpose and methods of using hand tools for laying steel, plastic pipes in grooves, on floors, walls, trusses, columns, cable trays, perforated mounting profiles and steel boxes;
  • Rules for the installation of grounding networks and grounding devices;
  • Production instructions for laying steel and plastic pipes, cable trays, perforated mounting profiles and steel boxes on the floor, walls, trusses and columns, installation of grounding networks and grounding devices;
  • Name, purpose and methods of using manual and electrified hand tools for the installation of grounding networks and grounding devices;
  • Rules for laying steel, plastic pipes in furrows, on floors, walls, trusses, columns, cable trays, perforated mounting profiles and steel boxes;
  • Labor protection requirements during the operation of electrical installations of consumers;
  • Rules for connecting cable cores;
  • Rules for the use of personal protective equipment;
  • Name, purpose and methods of using a hand-held electrified tool for terminating cable cores and for installing cable boxes;
  • Rules for terminating cable cores;
  • Elementary information on electrical engineering;
  • Production instruction for connection, termination and connection of cable cores and for installation of cable boxes;
  • Name, purpose and methods of using hand tools for connecting and terminating cable cores and for installing cable boxes;
  • Rules for the installation of cable boxes;
  • Rules for installing junction boxes;
  • Labor protection requirements during the operation of electrical installations of consumers;
  • Name, purpose and methods of using a hand-held electrified tool for installing junction boxes;
  • Name, purpose and methods of using a hand tool for sealing passages and installing junction boxes;
  • Requirements for labor protection when working at height;
  • Elementary information on electrical engineering;
  • Production instructions for sealing passages for all types of cable wiring and grounding buses, installation of junction boxes for cables;
  • Rules for the use of personal protective equipment;
  • Rules for sealing passages;
  • Production instructions for cutting the cable and temporary termination of the ends;
  • Rules for the use of personal protective equipment;
  • Conditional images on drawings and diagrams;
  • Rules for the use of electrified tools;
  • Rules for cutting cables with voltage up to 10 kV and temporary termination of ends;
  • Labor protection requirements during the operation of electrical installations of consumers;
  • Labor protection requirements for the operation of electrical installations;

    • 1.4. An electrician for lighting and lighting networks of the 3rd category must be able to:

  • Use manual and electrified hand tools for the installation of grounding networks and grounding devices;
  • Use hand tools and equipment for laying steel, plastic pipes in grooves, on floors, walls, trusses, columns, cable trays, perforated mounting profiles and steel boxes;
  • Use primary fire extinguishing equipment;
  • Comply with the requirements of labor protection, fire and environmental safety in the performance of work;
  • Read working drawings, electrical diagrams, diagrams (tables) of connections;
  • Use hand tools for connecting and terminating cable cores and for installing cable sleeves;
  • Use electrified hand tools for terminating cable cores and for installing cable boxes;
  • Provide first aid to victims as a result of violation of labor protection requirements or an emergency;
  • Use hand tools to seal passages and install junction boxes;
  • Use primary fire extinguishing equipment;
  • Use electrified hand tools for installing junction boxes (screwdrivers, wrenches);
  • Comply with the requirements of labor protection, fire and environmental safety in the performance of work;
  • Provide first aid to victims as a result of violation of labor protection requirements or an emergency;
  • Read working drawings, electrical diagrams, diagrams (tables) of connections;
  • Provide first aid to victims as a result of violation of labor protection requirements or an emergency;
  • Use a hand tool to cut the cable and temporarily terminate the ends;
  • Use primary fire extinguishing equipment;
  • Read working drawings, electrical diagrams, diagrams (tables) of connections;
  • Use an electrified hand tool for cable cutting;
  • Comply with the requirements of labor protection, fire and environmental safety in the performance of work;

    • 1.5. An electrician for lighting and lighting networks of the 3rd category is appointed to the position and dismissed by order of the managing director of the department for the development of qualifications of the Institution in accordance with the current legislation of the Russian Federation.

    1.6. Electrician for lighting and lighting networks of the 3rd category reports to the Managing Director of the Department for the Development of Qualifications of the Institution and the Head of the Steel Technologies Division

    2. Labor functions

  • 2.1. Laying of steel and plastic pipes in furrows, cable trays, perforated mounting profiles and steel boxes on floors, walls, trusses and columns, installation of grounding networks and grounding devices.
  • 2.2. Connection, termination and connection of cores of cables of all brands in various ways, except for welding, installation of cable boxes.
  • 2.3. Closing passages for all types of cable runs and grounding buses through walls and ceilings, installation of branch boxes for cables.
  • 2.4. Cable cutting up to 10 kV.

    • 3. Job responsibilities

  • 3.1. Laying of steel and plastic pipes in furrows, on floors, walls, trusses and columns.
  • 3.2. Installation of grounding networks and zeroing devices.
  • 3.3. Laying of cable trays, perforated mounting profiles and steel ducts.
  • 3.4. Connection of cable cores.
  • 3.5. Termination of cable cores.
  • 3.6. Seal of passages.
  • 3.7. Branch box installation.
  • 3.8. Temporary termination of cable ends.
  • 3.9. Cable cutting.

    • 4. Rights

    An electrician for lighting and lighting networks of the 3rd category has the right to:

    4.1. Request and receive the necessary information, as well as materials and documents related to the activities of an electrician in lighting and lighting networks of the 3rd category.

    4.2. Improve qualifications, undergo retraining (retraining).

    4.3. Enter into relationships with departments of third-party institutions and organizations to resolve issues within the competence of an electrician for lighting and lighting networks of the 3rd category.

    4.4. Participate in the discussion of issues that are part of his functional duties.

    4.5. Make suggestions and comments on the improvement of activities in the assigned area of ​​work.

    4.6. Apply to the relevant local authorities or to the court to resolve disputes arising in the performance of functional duties.

    4.7. Use information materials and legal documents necessary for the performance of their duties.

    4.8. Pass certification in the prescribed manner.

    5. Responsibility

    Electrician for lighting and lighting networks of the 3rd category is responsible for:

    5.1. Failure to perform (improper performance) of their functional duties.

    5.2. Failure to comply with the orders and instructions of the Managing Director of the Qualifications Development Department of the Institution.

    5.3. Inaccurate information about the status of the execution of assigned tasks and instructions, violation of the deadlines for their execution.

    5.4. Violation of the internal labor regulations, fire safety and safety regulations established in the Establishment.

    5.5. Causing material damage within the limits established by the current legislation of the Russian Federation.

    5.6. Disclosure of information that became known in connection with the performance of official duties.

    For the above violations, an electrician for lighting and lighting networks of the 3rd category can be brought in accordance with applicable law, depending on the severity of the offense, to disciplinary, material, administrative, civil and criminal liability.

    This job description was developed in accordance with the provisions (requirements) of the Labor Code of the Russian Federation dated December 30, 2001 No. 197 FZ (Labor Code of the Russian Federation) (as amended and supplemented), the professional standard "Electrician" approved by order of the Ministry of Labor and Social Protection of the Russian Federation dated January 18, 2017 No. 50n and other regulatory legal acts regulating labor relations.

    ✓ How to find a job as an outdoor lighting electrician in Moscow?

    To view all available vacancies, enter the profession "Outdoor Lighting Electrician" in the "I'm looking for" field, the city "Moscow" in the "Region" field and click the "Find a job" button. Select the offers you are interested in among thousands of ads and click on them to find out more details and get in touch with a direct employer.

    ✓ How many vacancies by profession Electrician for outdoor lighting can be found in Moscow?

    To date, the site has more than 2 million vacancies. Among them, you will definitely be able to find offers for specialists in the profession Electrician for outdoor lighting in Moscow. All ads are sorted by relevance. To see the latest or highest paid Outdoor Lighting Electrician jobs in Moscow, please select sort by posting date or salary respectively.

    ✓ How often are job advertisements updated for jobs as an Outdoor Lighting Electrician in Moscow?

    All vacancies on our resource are updated daily. Be sure to come back tomorrow to see new offers and don't miss your chance to get a good job as an outdoor lighting electrician in Moscow

    Read also