Working outdoors brings a lot of pleasure. But if you have to tackle a serious project that requires considerable physical effort, then at the end of the day you feel tired. You can quickly restore strength in different ways. One of them is relaxing on a wooden deck chair with a glass of soft drink in hand. Such furniture can be purchased at a furniture showroom or made with your own hands.

Types of structures

Traditionally, chaise lounges for summer cottages are made in the form of structures that resemble chair-beds, in which the upper part is similar to the back of a chair, and the lower part is like a small sofa. The main advantage of such models is the ability to change the position of the backrest. Depending on the design, there are several types of sun loungers:

• in the shape of a rocking chair;
• hanging;
• anatomical;
• folding

In order to make it easier to move wooden sun loungers, special wheels are often added to the design, which allow them to be transported to any place.

A special type of sun loungers are anatomical devices for the garden, which exactly follow the curves of the human body.. You can talk about their convenience and practicality only after purchasing such pieces of furniture.

Some manufacturers are trying to offer non-standard wooden sun loungers for summer cottages, so they involve designers in their work to jointly create devices for relaxation of unusual shapes. Such models are more expensive than usual, but if you want to surprise your guests with the fancy shapes of a chaise lounge, then you should still think about buying such furniture.

Thanks to the presence of a hanging mount, the sun loungers allow the owner to swing while relaxing on it. To install such a device on a metal frame, a clamp is used, which provides it with high reliability. Such a structure can be placed in a shady place, or it can be installed in the upper part of a special part in the form of a small canopy. Rocking in such a lounge chair will bring nothing but pleasure.

Instead of a stable, solid support, you can add rounded hoop legs to the design of the chaise lounge. Then it can be used as a rocking chair. This model can be installed anywhere. If desired, it can be folded and moved to another part of the site or a special place that was chosen for relaxation.

It is no coincidence that more and more summer residents are thinking about making a sun lounger. This device attracts them with its functional features:

• A garden lounger provides the most comfortable conditions for resting the spine and the muscles located next to it. In the reclining position, the back muscles, which are subject to particularly high loads when working in the beds, relax as much as possible.
• The sun loungers are not only easy to use, but also easy to fold, allowing you to move them from one place to another.
• Design features allow the owner to effortlessly change the backrest tilt from a sitting to a lying position.
• A wonderful decoration for a summer cottage that will look great not only in the garden, but also on the veranda. A chaise longue can give a country house a stylish and beautiful look.
• A great way to relax for people of different sizes. Due to their high reliability, such devices can easily withstand up to 100 kg of live weight.

Material selection

Traditionally, chaise lounges for summer cottages are made of wood. They are distinguished by environmental safety, ease of operation and affordable price.

But wood is not the only material from which a chaise lounge can be made. Manufacturers also use other materials to make them:

• plywood;
• textile;
• corrugated cardboard;
• logs;
• wooden pallets;
• rattan;
• plastic;

Plastic is quite often chosen for the manufacture of sun loungers, which are installed next to natural bodies of water and in swimming pools.

Advantages and disadvantages

Wood is popular as a material for making sun loungers for the garden due to the following advantages:

• low price;
• availability;
• ease of care;
• environmental friendliness.

The only drawback is low resistance to decay, which can be increased through special processing.

Often, chaise lounges for summer cottages are made of metal, which has the following positive properties:

• high strength;
• low weight, which can be achieved through the use of an aluminum frame in combination with a fabric middle.

To make such a chaise lounge, the owner must have welding skills to create a frame. Such a lounger must also be treated with anti-corrosion compounds, otherwise it will not last long.

Plastic structures have the following advantages:

• light weight;
• unusual design solutions;
• no need for special care;
• low price.

Plastic sun loungers have very low strength and do not withstand the aggressive influence of climate. Not everyone has enough experience and knowledge to independently build a deck chair from this material for a summer house.

Preparing for work

Before you start making a chaise lounge, you need to think about the materials and tools that you will need to create it. Much here depends on the chosen model. A fairly common option is when the chaise longue is made of mixed materials - wood and fabric. To get a reliable and attractive looking fabric chaise longue with a wooden frame, you will have to prepare the following:

• durable fabric (denim, tarpaulin, canvas) 2 m long and 50 cm wide;
• 3 pairs of slats 0.25 x 0.6 cm, lengths 62, 110 and 120 cm;
• wood slats 2 x 2 cm (one 65 cm long and two 50 cm long);
• PVA glue.

You cannot do this work without certain tools, and among them there should be mainly those that any owner has at home or can purchase:

• nuts and bolts of suitable sizes;
• roulette;
• square;
• needle file;
• sandpaper with a minimum section;
• electric saw;
• drill.

If you want to make a chaise lounge from other materials, you will need a completely different amount of consumables and a set of tools. To make metal products, you cannot do without a welding machine and a grinder. When creating structures from rattan, jute or wicker, you will need special weaving tools.

Before starting work, it is advisable to find as much information as possible on making a garden sun lounger with your own hands in order to learn about all the intricacies of the work process and thereby avoid possible difficulties.

Now that everything necessary for the work has been prepared, we can proceed to consider the process of creating a long chair from wooden material. The choice in favor of wood is quite logical, since it is the most affordable and environmentally friendly material. It can be freely purchased without incurring significant cash costs. Even amateurs will not have any difficulties when working with wood, who can create something with their own hands even with minimal skills in working with this material.

Work order

The process of making a sun lounger itself will not cause any difficulties to the owner of the site. If you approach the matter with all seriousness, you can make a beautiful thing. Making a sun lounger with your own hands looks like this:

• The first step is to manufacture the basic elements of the frame. From the available lumber it is necessary to make boards with the following dimensions 400 x 2.5 x 8 cm. Additionally, three bars 400 x 5 x 10 cm are required. In addition to them, two fixing pins must be made.
• Each wooden part of the frame must be thoroughly sanded and coated with a special impregnation to protect it from mold and rot.
• The frame is made of wooden beams in accordance with the selected design.
• To construct a seating area, it is necessary to cut boards 60 cm long each. Their number can be any and depends on the size of the gap between the boards. For standard models measuring 60 x 200 cm, most often no more than 13 boards are required, which are placed at intervals of 1 cm from each other.
• Using a screwdriver, the boards must be attached to the frame, making sure that the wooden pieces are positioned strictly parallel to each other.
• We begin to attach the legs, having previously brought each one to the same length, which should be 35 cm. If desired, the chaise lounge can be made a little lower. The prepared bars must be secured at the head and at the feet. On the side of the head, the legs can also be made single.
• To make the backrest, you will need to make a frame, which should fit freely into the structure made in the previous stages. The frame should have the following dimensions - two pieces of 88 cm and 3 pieces of 39 cm. Do not worry about the fact that there will be gaps around the perimeter of the backrest inserted into the frame. They are necessary for freely reclining the backrest.
• Directly on the back frame it is necessary to fix the slats of the required length. They can be installed either crosswise, fixed to the main part, or lengthwise. During installation, the screws are screwed in, recessing them into the body of the tree. This will make using the sun lounger safer. To make the product look attractive, the top of the rail can be rounded.
• To ensure the most reliable fastening of the backrest to the base, it is necessary to first make through holes in these parts, moving 9 cm down from the edge. You need to insert the mounting pins into them and secure them.
• Before installing the supports, you will need to cut grooves in the main structure - 2 pieces on each side. The first is made at a distance of 9 cm from the stud with dimensions of 5 x 10 cm, and the second is cut at a distance of 20 cm from the first, the dimensions of which should be 5 x 5 cm.
• To adjust the position of the backrest in this model, a wooden beam 60 cm long is used. It must be installed in the first or second groove, which will allow the product to be transferred from a half-sitting position to a half-lying position.
• The final stage is finishing the product. You can use ideas borrowed from ready-made drawings or design the product using available materials. A chaise lounge for a summer house can be painted, varnished or decorated using decoupage techniques - any of these options will change the appearance of the chaise lounge and extend its service life.

The method described above for making a wooden sun lounger with your own hands is not the only one. Other options are also possible - for example, using a metal frame from an old folding bed as a base.

Care of the finished product

The service life and functionality of a country lounger largely depends on proper care for it.. To ensure that it brings only pleasure to the owner for many years, the following activities should be carried out regularly:

• wet cleaning of textile elements;
• lubrication of folding mechanisms;
• timely painting.

Many of our compatriots who own dachas arrange their holidays there in different ways. You can often find wooden sun loungers in their areas, which provide them with excellent conditions for relaxation. For the most part, these are home-made structures that can be made with your own hands, even without experience in the construction industry. Due to the simplicity of the design, sun loungers can be made from available material. But it’s still not worth starting such work without a drawing.

How to ideally end a troublesome and tiring day in the fresh air? The best way to relax after working in the garden is to relax on a sun lounger with a glass of freshly squeezed juice in your hands. At the same time, it is very important that the chaise lounge fits perfectly into the surrounding environment and gives a feeling of peace and tranquility. Can't find suitable garden furniture in stores? Then it's time to learn how to make it yourself.

Types of sun loungers for the garden

Before you make a chaise lounge yourself, you should decide on its type. However, experts advise not to experiment using modern plastic materials, which are characterized by poor quality and fragility, as a basis. Better look for a high-quality wooden base with a flat, smooth surface. The only drawback of such a property will be its large weight, but this problem can be solved by installing casters on the legs.

Materials for work

To make a wooden chaise lounge with your own hands, you need to prepare the following materials and tools:

• a slab of laminated wood, the thickness of which will be at least 2 cm;
• boards (0.25 cm) and beams (0.45×0.45 cm) for finishing work and creating a frame;
• electrical appliances (jigsaw, screwdriver, drill);
• drills with a diameter of 0.4 cm;
• 4 rollers, 10 cm each;
• corners (as for fastening a bed);
• sanding sheets;
• varnish and paint to decorate the structure and protect it from damage.

For homemade sun loungers, it is better to use sheets of spruce or other coniferous wood. They resist moisture well and are not afraid of sudden temperature changes. These materials can be bought directly at construction centers or made to order from a cabinetmaker (carpenter).

Overall dimensions of the product and getting started

You can make a wooden chaise lounge in accordance with the dimensions of your body or according to the individual dimensions of future owners. Or you can stop at the standard size - 60x190 cm. Once the dimensions have been determined, you can start working:

• form the sidewalls from the beams and fold the structure frame, attaching the parts with corners;
• trim each outer side of the finished frame with prepared boards;
• proceed with further assembly.

Stages of creation do-it-yourself sun lounger for a summer house

1. Make blanks for the legs of the product using bars of the required height. Usually their height is about 5-10 cm, but you can choose other sizes.
2. At a distance of 5-7 cm from the edges of the long beams, secure the legs using long screws.
3. Attach a roller to the center of each leg. To do this, you need to take shorter screws (about 3 cm in length).
4. Using an electric jigsaw, begin cutting the lattice pieces to create your DIY chaise lounge. The most suitable size for planks is 8x60 cm.
5. Start screwing the slats to the sunbed frame, using special spacers to create ideal gaps (1-2 cm will be enough).
6. After assembling the structure, it needs to be sanded and painted in a suitable color.

If you decide to make a folding chaise lounge with your own hands, divide the wooden lattice into two parts, which can then be connected with ordinary door hinges. At the same time, it is important not to forget about an important detail - the fastening strip. It should rest on a stand secured with screws.

Below is a drawing for a slatted lounge chair:

Making a chaise lounge on a frame base using thick fabric

Another popular and simple way to make a chaise longue for a summer house with your own hands is a chaise lounge made of material on a frame. This is a light and comfortable summer cottage option that can be converted from a lounger to a chair and back with one movement of the hand.

You will need the following materials and tools:

• two wooden slats 0.25x0.6 cm of different lengths (120 cm, 110 cm, 620 cm);
• wooden slats 2x2 cm (65 cm - 1 pc., 2 pcs. 60 cm and 50 cm);
• high-quality dense material 2×0.5m;
• drill;
• bolts and nuts of suitable diameter;
• PVA glue;
• “zero” sandpaper;
• round file.

Choose a wear-resistant fabric that is not afraid of open sunlight and moisture. The ideal option would be jeans, canvas or tarpaulin. It is better to choose slats from oak, birch or beech (they have increased hardness and strength).

To make light sun loungers for your garden with your own hands, you need to prepare slats of the required length and sand them.

Assembly steps

• you need to drill holes suitable for the selected bolts on each long rail, always retreating 7-10 cm from their edges; all irregularities should be immediately sanded with a needle file until smooth surfaces are formed;

• at the head of the frame (indicated in figure “B”), several holes should be drilled at once for subsequent adjustment of the tilt of the seat back;
• to create a seat, you need to make two more holes at the ends of the long slats; their diameter must match the diameter of the prepared round slats (in this case - 2 cm); To make the slats hold tighter, you should lubricate their ends with PVA glue;
• combine structure “A” and “B” using screws passing through the upper holes, then combine the resulting module with element “B” in the same way;
• stretch the fabric by folding the edges over the crossbars and sewing several seams with strong threads (this procedure can be completed before the final assembly of the product, then you can sew the material using a regular sewing machine).

How to make a chaise lounge with your own hands even more comfortable?

To ensure additional comfort for your sun lounger, you should place a mattress on it. Take measurements of the finished structure, buy a sufficient amount of fabric and filling material. You can sew a mattress using any known method.

Now you can independently design a sun lounger for your summer cottage, without resorting to the help of specialists or the advice of friends. There is nothing difficult in this matter if you strictly follow the instructions and follow the information. Learn with us and improve your skills!

Camping is a great way to relax. Some go to the village, others to the country, where comfortable sun loungers await them, allowing them to forget about the environment and take a little nap. Such attributes relieve tension from the spine and almost all muscles; you just have to choose the most comfortable option for yourself: a rocking chair, a regular folding chair or a lounger.

The easiest way is to buy a ready-made chaise longue, choosing it to match the interior of the dacha or to suit your individual needs. But not everyone has the financial means to do this. A handmade model is more valuable and fully suits the taste of its owner.

Kinds

Making homemade sun loungers is not difficult. Before starting work, you need to choose the type of furniture you want to bring to life. There are several of them:

• Armchair. As a base, you can take elements from a crib or cot. Armrests are made upon request.
• Sun lounger. The creation process takes about four hours. The product can be made of plastic or wood, which is ideally sanded and varnished.
• Rocking chair. Its back is at an angle, so it is possible to lie down, relax, and take a nap. At the same time, it is important to make the bottom of the attribute strong so that it does not become loose when swinging.

In addition to the distribution of products by appearance, there are variations in the types of structures:

• Monolithic. When it is created, all elements are fastened together, so disassembly is impossible. This chaise lounge is strong and durable, but the backrest is not adjustable and the product as a whole does not fold. As a result, problems may arise with its transportation.
• Portable. The reliable and compact folding attribute has a special mechanism that allows you to easily adjust its position.
• Soldered with inserts. This practical product will decorate any interior thanks to its attractive appearance. But inserts made from other materials do not guarantee durability.

If the chaise lounge is made of durable materials, it can be supplemented with a blanket, pillows and other items for a comfortable rest.

Possible materials

When choosing the material for making a sun lounger, you need to take into account its location. This could be a summer cottage, a beach, a special place by the pool or even at home. The following options exist:

• Wooden. This design is durable, comfortable, environmentally friendly, and differs in shape and appearance. The only drawback is the heavy weight. To make it easier to carry the chaise lounge, wheels are attached to the legs.
• Plastic. The products are lightweight, inexpensive, and easy to care for. One of the negative aspects is its fragility.
• Fabric. The attributes are convenient and compact. The frame can be made of boards, metal, profile pipe.
• Made from rattan. Against the backdrop of nature, such sun loungers look incomparable. They are environmentally friendly, but expensive. If you have the skills to weave, it’s easy to make such an attribute for relaxation.
• Made from PVC. The same lounger with a fabric base, but the frame is based on PVC pipes.

Making a sun lounger yourself is not difficult; you need to correctly determine the dimensions of all the elements and spend several hours assembling them.

Manufacturing diagram of various options

Before you start making a recreational attribute, you need to draw its diagram. It plays an important role because it determines the dimensions of the elements for the product, their shape, quantity and other details. You can make such a scheme yourself, but not everyone can do it. Therefore, we will give an example of such a scheme. A high-quality chaise lounge (fabric) will be obtained according to this drawing with dimensions.

All that remains is to find the materials to create a lounger. There are also other options for drawing different types of sun loungers.

From a wooden lattice

This chaise lounge is quite durable, reliable, and its backrest is adjustable. For this model, you should take wooden slabs made from coniferous trees, as they are resistant to climate change. Here is a diagram with the indicated dimensions:

All work is carried out in stages:

• A frame is created from bars, it is fastened with metal corners.
• Boards are attached to the outside, and legs are attached to them.
• The slab is sawed using a jigsaw and a wooden lattice is made.
• The adjustable backrest is separated from the main part of the attribute and secured to it with a door hinge.
• A fastening strip is attached to the headboard area, and a stand is attached to it with screws.
• The finished product is sanded and varnished.

If the lounger will often move from one place to another in the future, it is better to attach wheels to its legs, because the weight of the attribute itself will be considerable.

Fabric on frame

Work on the frame occurs in the following order:

• A ready-made base is taken from a cot or crib. If this is not available, slats of the required length are taken or cut and sanded.
• Holes are drilled in the main frame, the other is equipped with cutouts (4 pieces) to adjust the backrest tilt.
• Holes are made at both ends of the slats to install the seat.
• Circular cross members lubricated with glue and installed in the holes.

Now you should prepare the seat itself. To do this, you need to fold the base of the product and measure out a piece of fabric. It should sag to accommodate the owner comfortably. All edges are processed using a sewing machine. Then the cloth is wrapped around the transverse round crossbar and nailed on both sides with small nails. The attribute is ready and you can enjoy your vacation.

From pallets

This is the easiest option for creating a sun lounger. This product is light in weight (easy to move to different places) and practical (you can put a mattress on it for more comfort). The work occurs in the following order:

• Pallets are dismantled, all the nails are pulled out.
• A frame is made from two even boards. They are laid edgewise and parallel to each other, and the rest are sawn in half and attached to the base. The result is a seat with two supporting legs at the back.
• To create the front legs, a board from a pallet is sawn into two equal parts. Next, using bolts, they are screwed to the base of the seat and tightened with nuts and washers. A cross bar is necessary to strengthen the legs.
• The back is created from two boards, which are connected to the seat frame using bolts, nuts, and washers. This should be done at an equal angle. After this, the boards for the back are attached to the support boards with screws. Behind it, a block is attached to the rear legs - this is necessary for the strength of the structure.

The final step is to sand the attribute with an emery sheet.

To prevent the boards from rotting, the product is varnished.

Made from polypropylene pipes

The design of such a chaise lounge is identical to the fabric one, only the wooden frame is replaced with polypropylene pipes. To create the product, you need 2-inch pipes, fittings in the form of the letters “g” and “t”, 8 and 6 pieces, respectively. The assembly process has several stages:

• First, a vertical bar is made. Take a T-shaped connector and use it to fasten 30 and 45 cm pipes. L-shaped fittings are put on the ends. The lower vertical is also fastened and the two sides are connected.
• Important point: the horizontal crossbar must be solid and have a length of 66 cm. It is mounted closer to the connection with the letter “T”, which must be directed towards the inside of the structure. The other side is two 30 cm pipes, fastened with a T-fitting. This tee must be rotated 45 degrees from the oblong side. The final result is a rectangle.
• For a rotating seat, a 5-centimeter pipe is inserted into the triple connecting element, which is secured with the same part. This will be the basis of the horizontal frame.
• The long sides of the horizontal frame are made in the same way as the vertical ones. For the crossbars, take a tube 30 cm long and another, consisting of 2 x 20 cm with a tee fitting. The result is a rectangular figure within the same figure.
• The seat will be located between the short section of the horizontal section and the long section of the vertical section. After adjusting the tilt level, a support is inserted at the back.

The frame is ready, which means that a fabric base is now needed. To do this, take a thick canvas and attach it to the base.

"Kentucky"

This leisure attribute has a number of advantages: compact, convenient, easy to fold, light weight, durable and reliable, and takes up little space when folded. In appearance it resembles a chair with a high back. The unusual assembly method looks original. To do this, you will need bars, galvanized wire (diameter 4 mm) and the same brackets for fixing the wire (16 pieces), wire cutters, and a hammer. The process goes like this:

• A protective coating is applied to the bars. But the parts must already be ready for assembly.
• Holes are made. However, they should be a couple of millimeters larger than the wire.
• The bars are assembled in an interesting way, which is why the whole structure looks creative. Here is the diagram:

At the end of the entire process, the chair carefully rises and unfolds. This folding product looks stylish and modern.

Original ideas

People with creative thinking do not always want to see simple sun loungers on their property, so there are several original ideas for creating models for relaxation.

From birch logs

This design has an unusual appearance, so you will have to work hard. For such a lounger you need birch logs with a diameter of 75-120 mm. But you need to take into account that the larger the diameter of the chocks, the more the finished product will weigh. Before you start, you should stock up on the following tools:

• electric saw;
• drill;
• set of drills;
• self-tapping screws;
• staples.

How pleasant it will be to lie down on a comfortable chaise lounge made by yourself after a hard day at work in your garden. Currently, there is a large variety of sun loungers made from a variety of materials. And now we will tell you how you can make sun loungers yourself from wood and fabric, as well as how to properly take care of them, so that you can enjoy your holiday in the country for decades.

Chaise lounge for a summer residence - description of the design, types of products and their characteristics

Sun loungers have their own special design, the frame of the back, seat and armrests, so that a person feels as comfortable and comfortable as possible. We are talking about both semi-reclining and semi-sitting versions of the chaise lounge, which contribute to maximum relaxation of all the muscles of the human body.

These are the qualities that a classic rocking chair has, which you can make yourself if you have all the necessary drawings with calculations and design sketches.

Thanks to the lightness of their design, country sun loungers can be moved to any place in your garden plot, depending on whether you want to lie in the sun or in the shade. Folding products made of wood and fabric are very convenient, as they can be put indoors when it rains, and they will not take up much space.

Wooden sun loungers have a high level of durability and are renowned for their long service life if properly cared for.

Today, having a competent and accurate drawing in your hands, you can make your own folding or light hanging chaise lounge, which will fit quite aesthetically into the exterior of the entire garden plot.

Types of sunbeds and sun loungers

Depending on the type of construction, sun loungers can be divided into several types:

• Monolithic frame. This is an outdoor chair in which all elements are tightly connected to each other. This product is very durable and can withstand even the heaviest loads. It is absolutely safe even for small children under 1 year old. But, meanwhile, such a product during its operation may create some inconvenience. It is impossible to make your own adjustments to such a chaise longue and change the angle of the backrest; it does not fold and therefore is inconvenient to move from place to place, as well as to store in small rooms (pantries, closets, etc.).
• Monolithic chairs with special inserts have a beautiful appearance and are characterized by a high degree of decorativeness. They are equipped with additional inserts, which are made of materials with different characteristics, which reduce the strength of this design. But, meanwhile, they look very aesthetically pleasing and impressive.
• Portable folding sun lounger designs have special movable mechanisms that allow you to quickly change the position of the backrest at your discretion. This applies to the entire sun lounger as a whole. If necessary, a person can easily change the degree of inclination of the backrest, headrest, and lower footrest. You can take portable folding lounge chairs with you on a trip thanks to their extremely compact folded dimensions. They practically do not get dirty during long-term use.

Gallery of sun loungers and their types

Designer chaise lounge - rocking chair with durable metal hoops instead of legs An original sun lounger for a country house Folding chaise longue with canvas seat, plastic handrails and metal frame Plastic folding chaise longue with soft mattress Wooden sun loungers for the garden Original chaise lounge made of wood with soft mattresses in the form of a spiral Country chaise lounge made of rattan with adjustable backrest An original designer chaise lounge that you can make yourself from a sheet of chipboard Chaise lounges with a spring seat on a metal base

Preparing for creation: choosing a drawing and deciding on dimensions

Before you start making a sun lounger for your home, you need to decide on the optimal design and choose the most optimal and simple option that you can easily make yourself without the help of craftsmen.

The main thing is to find accurate and competent drawings that will allow you to easily cope with such work and ultimately get a convenient and most reliable design for a summer holiday in your garden, as well as near a river or lake.

Choosing materials to assemble a comfortable and durable structure: tips for choosing

Let's look at what types of country lounge chairs there are, as well as the types of materials from which they are made. Their advantages and disadvantages, as well as what materials can be purchased for their manufacture.

1. Sun loungers made from wooden boards and beams are considered the best, since wood is an environmentally friendly natural material. Today you can see a wide variety of options for sun loungers and sunbeds, from ordinary street chairs with a movable backrest to the most comfortable models that exactly follow all the contours of the body of the person sitting. Since the back of such a chaise lounge can be fixed in several different positions, a person can always take the most comfortable position for him while relaxing to sleep or contemplate nature. It should be noted that wooden sun loungers are quite heavy, so usually their frame is equipped with two wheels for convenient movement of the product around the garden. As a convenient addition, you can sew fabric mattresses with soft padding, which will be attached to the frame using ordinary rope ties. Since wood is afraid of water, it is not recommended to place such sun loungers near pools, rivers or lakes, where water may constantly fall on them or they will absorb large amounts of moisture. Water will cause the wood to swell and also deform. Even if the boards and beams are well treated with various means and covered with water-repellent deck varnish, it is still not worth the risk. When purchasing lumber for making a frame, you must keep in mind that the boards and beams of larch, oak, birch, teak, hazel, and spruce are considered the most durable and high-quality. Pine is the cheapest, but it must be well dried and carefully treated with antiseptic agents.
2. Plastic sun loungers are a budget option that are usually installed near swimming pools, on city beaches and in other public places. They cannot be made at home, but they are affordable, easy to care for, and are not afraid of moisture.
3. Sun loungers in the form of swings and rocking chairs can provide wonderful relaxation for both adults and children. The frame of the chaise lounge - swing clings to a strong hook on a reliable metal support, and then simply swings in the air. At the top of the counter there is usually an umbrella or a large canopy that protects vacationers from the hot rays of the sun.
4. A very unusual option is a designer model of a rocking chair, which has round supports in the form of two strong iron hoops. This chaise lounge can be easily folded and moved to another place.
5. Wicker lounge chairs are an excellent option for outdoor furniture for relaxation, which is made from natural materials: the popular rattan, elastic wicker or durable hemp. Products can also be made from synthetic fibers. Since wicker sun loungers are considered premium furniture, their cost is quite high. Rattan products are distinguished by their beauty, design sophistication and excellent style solutions.
6. Sun loungers made from pallets or pallets, which are used for moving and storing goods, will be an excellent cost-effective, inexpensive option, since such wooden structures can be bought at a bargain price if they have already served their purpose and are unsuitable for use. They will need to be slightly repaired, sanded and painted with multi-colored paint, and then you can assemble a sun lounger for your home. The base of the structure is made from two pallets bolted or screwed together, and the inclined back is made from the third. They look very beautiful and aesthetically pleasing, and also have a long service life.
7. Fabric sun loungers with a wooden or metal frame are the most convenient, comfortable and easy to use. The basis here is a frame made of wood or metal, on which is placed a seat made of dense fabric (canvas, tarpaulin, jeans, teak, mattress fabric or camouflage).

Wood and fabric are environmentally friendly materials, so this chaise lounge will be an excellent option for a summer house where there are small children. The downside of this outdoor design is the fragility of the fabric, but if it tears or loses its aesthetic appearance, you can always replace it with another one and the chaise lounge will be like new again. The wooden frame can be sanded and re-varnished or painted, and the metal frame can be treated with sandpaper and also painted with a special water-repellent paint for metal.

It is best to buy a seamless metal profile, since the chaise lounge frame will have to “support” a fairly large person’s weight, and it must be durable.

If possible, purchase stainless or galvanized pipes, which are less susceptible to corrosion and have a long service life.

Calculation of the required amount of material for construction: working tools

In order to make a wooden chaise lounge with a fabric seat at home, we do not need complex and expensive tools, so even an inexperienced novice craftsman will be able to make such a design for his summer cottage or suburban area at the lowest cost.

To construct the backrest we will need wooden boards of the following sizes:

• Two pieces 19x38x1219 mm;
• One piece 19x38x610 mm;
• One piece 19x38x648 mm;
• One piece 19x64x610 mm.

To make the seat frame you need boards of the following sizes:

• Two pieces 19x38x1118 mm;
• Four pieces 19x38x603 mm;
• One piece 19x38x565 mm;
• One piece 19x64x565 mm.

To make a backrest support:

• Two boards 19x38x381 mm;
• One wooden round dowel with a diameter of 12 mm (length 648 mm).

To make a fabric seat we will need:

• Two pieces of awning, denim, camouflage, mattress or other durable fabric (a piece measuring 1372x578 mm);
• Two wooden dowels with a diameter of 12 mm (length 559 mm).

For fastening the structure:

• Four bolts with nuts size 6x50 mm;
• Twelve washers for nuts;
• Wood screws size 4x50 mm;
• Regular PVA glue or special glue for wood products.

The tools we will use are:

• Round file;
• Fine-grained sandpaper or sanding machine;
• Roulette;
• Electric drill;
• Grinder or saw (manual, electric or gasoline);
• Wood putty;
• Construction pencil or marker;
• Water-repellent varnish or paint;
• Hammer and screwdriver;
• Square.

Wooden elements must be re-sanded once every two or three years, coated with protective agents, varnish or water-repellent paint, and then the chaise lounge will serve you much longer.

Video: Making a simple lounger

Video: How to make a wooden chaise lounge with a movable backrest with your own hands

Video: How to make a metal structure with your own hands

A wooden chaise lounge with a fabric seat will be the easiest design to manufacture and convenient for summer holidays. If you make several designs with your own hands, you don’t have to worry that you will have nowhere to relax on warm summer days with your large and friendly family. Both adults and children will be able to comfortably stay on the territory of a personal plot or near a river that flows nearby and enjoy beautiful views of natural landscapes and flowing water.

Not so long ago, a chaise longue was considered exotic, and only wealthy people could afford it. We saw sun loungers in colorful magazines and American films, but even with a strong desire, an attempt to buy something similar for ourselves would have turned out to be a failure - there were simply no sun loungers for sale.

Well, everything passes sooner or later, and the information revolution generously gifts us with new opportunities. Now anyone can find a manual on the Internet on how to make a sun lounger with their own hands. However, such plans often turn out to be difficult to implement, especially for a beginner. They require the use of a large number of expensive tools, and therefore remain unfeasible for many.

This master class is a pleasant exception to the rule. The chaise lounge presented by the author has a simple design and a clear system for folding and adjusting the backrest tilt. If you approach the issue of choosing materials correctly, you will need a very modest arsenal of power tools and, in extreme cases, you could very well borrow some of them from friends and acquaintances.

In addition, given the fact that the chaise longue is made of natural wood, it can easily be used at home, instead of a couch or chair in the living room. It folds and unfolds quickly and has a completely finished appearance. A beautiful textile mattress will complement the look, and the chaise lounge will fit perfectly into the interior of your home.

In order to make a chaise longue with your own hands, you will need:

Materials:

Pine board 20 - 30 mm thick;
- slats with a cross section of 30 x 30 or 40 x 40 mm for the manufacture of a backrest folding system;
- natural or mineral oil for wood processing, drying oil or varnish for woodworking;
- screws and small nails;
- glue for gluing wood materials;
- metal one-piece loops for fixing the back: two larger ones and a smaller pair;
- a ready-made mattress with ties to secure it or fabric, batting, foam rubber and threads for its manufacture.

Tools:

Miter saw, circular saw or hacksaw for wood;
- a sander if you are using old or unsanded boards;
- screwdriver or Phillips screwdriver;
- electric drill;
- a clamp with a device for drilling pocket inclined holes (optional, but greatly facilitates the work);
- paint brushes;
- construction tape and square;
- pencil.

Step one: create a sketch and layout of the chaise lounge

A model of the product is simply necessary if the product itself consists of a large number of parts. It will not allow you to get confused in their countless list and will significantly speed up the entire work process. In addition, you will have the entire list of parts and their exact size. Well, what would we do without this?

But everything comes before a sketch. This hand-drawn sketch on a piece of paper gives birth to an idea and lays down the basic outlines of the image of the future product. This is where we should start.

In your case, the computer model of the chaise lounge is already ready and you can safely use all the dimensions indicated in this master class as a basis. But first, write down on paper the entire list of parts that you have to make. Indicate their dimensions opposite and only then start working.

Step two: making parts

The detailing you have collected should be transferred to the material in the form of markings. Use a pencil for this to easily correct any mistakes that have crept in. Also use a construction square. Especially if you plan to use a hand saw to cut the boards. It will allow you to mark angles of 45 and 90 degrees, and there is no such thing as too much precision.

So, mark the parts and start making them. Cut the boards into pieces of the length indicated in your list. You will need:

Two longitudinal frame parts 1850 mm long;
- five transverse frame parts 470 mm long;
- four blanks for legs 280 mm long;
- four to five boards for the base of the sun lounger, 1270 mm long;
- two long side boards for the base of the sun lounger, 190 mm long;
- two small slats for supporting the backrest when folded, 580 mm long;
- three bars for making a backrest 43 mm long;
- four to five boards for the base of the backrest;
- two slats for the backrest folding system, 230 mm long;
- one horizontal rail for the backrest folding system, 460 mm long;
- six small pieces of slats for the backrest folding system - three on each side.

All specified dimensions should be clarified, since the author indicated them in inches. They also depend on the thickness of the boards you use. To find out the dimensions in your case, always start with general measurements and gradually move on to smaller details.

Step three: assembling the sun lounger

Start by assembling the chaise lounge frame. Remember that any frame is usually assembled using screws. This ensures relative strength of the entire structure. However, it often happens that screws alone are not enough. Then glue is also used. Such combined connections serve very well and do not require repair for a long time.

Assemble the chaise lounge frame using glue and screws and secure the legs. Use small nails to secure the base parts to the frame. At the same time, make the back panel.

Inside the hole for the backrest on the sides, screw two support rails on which the backrest rests when folded and on which the rail sections (teeth) are attached to adjust the backrest tilt. Fix the teeth themselves.

Connect the backrest to the frame using a pair of one-piece metal loops. Also make a U-shaped piece for the back and secure it in place with smaller loops. Check the backrest adjustment.

Step four: protecting the wood

Any furniture is subject to wet cleaning sooner or later. Untreated wood can hardly tolerate such treatment, and the result is often zero. Therefore, wood must be treated with suitable paints and varnishes.

The author decided to leave the wood unpainted so that it could be seen that it was made from natural wood. In this case, the most reasonable option would be to varnish the chaise lounge with a matte or semi-gloss clear varnish.

Since furniture is usually used very intensively, you should choose a varnish that will provide the most durable and wear-resistant coating. For example, profile furniture varnish. Apply it to the surface of the wood in several layers and let each one dry thoroughly.