How to arrange the washing machine in the interior of the bathroom (53 photos). We place a washing machine in a small bathroom How to install a washing machine in a small bathroom

Most people live in apartments that have a very small area. In particular, bathrooms are also given little space. And this is logical, because by reducing the size of bathrooms, designers increase the living space of apartments.
On the one hand, a tiny bathroom is a big drawback, as even the most skilled designers cannot make a small room big.
On the other hand, with the right arrangement, even a small bathroom will become a functional and comfortable room, a great place to get a boost of energy in the morning and relax in the evening.
One of the major challenges you may face when planning and renovating a small bathroom is where to fit the washing machine. It is necessary that at least a bath (or shower), a toilet bowl, a washbasin fit into a small room.
What can we say about a laundry basket, a locker for small things ... Placing a washing machine in a small bathroom is a particular problem. The standard machine has quite impressive dimensions. However, this problem is solvable.
9 tricks for placing a washing machine in a small bathroom.
The most popular bathroom design technique is the placement of a washing machine near the washbasin. For harmony, it is better to combine them with one tabletop. In order to visually expand the space, a mirror will be correctly hung above the tabletop.

And here is another interesting idea that will significantly save space in the room. True, it is only suitable if the sink is located high.

From this stylish solution - I'm just delighted! I'll probably take it on board.

If the bathroom has a niche, then this space must be used 100%. For example, put a washing machine there, and use the rest of the space for storing small things.

What do you think of this bathroom design? Of course, you can’t call it small, but the idea of \u200b\u200bplacing a washing machine is very worth using.

In old-style houses, the design does not provide for the installation of a washing machine. For this reason, residents are forced to show real miracles of ingenuity. It is convenient to place washing machines under flat sinks. However, in this case, the sink may be located unnecessarily high.

To increase the free space in the bathroom to fit a washing machine, you can install a shower cabin instead of a bathtub. Often a bath takes up half the area of the bathroom, and the smallest size of the shower cabin is 80 by 80 centimeters. In the vacated space, you can place a washing machine, cabinets, a laundry basket and other small things you need.

You can also make a small cabinet under the washing machine, and place a small curtain on hooks instead of doors.

Another interesting idea. Pay attention to details!

The bulk of Russians live in apartments with a very small area. In particular, bathrooms are also given little space. This is more than understandable, because. by reducing the size of bathrooms, designers increase the living space of apartments. On the one hand, a small bathroom is a disadvantage, because. Even the most skilled designers can't make a small room look big. On the other hand, with the right arrangement, even a small bathroom will become a functional and comfortable room, a great place to get a boost of energy in the morning and relax in the evening.

How to make a bathroom comfortable and practical?

It is necessary that at least a bath (or shower), a toilet bowl, a washbasin fit into a small room. As a maximum - in addition to the already mentioned, a washing machine, a laundry basket, a locker for small things, etc.

Placing a washing machine in a small bathroom is a particular challenge. The standard machine has quite impressive dimensions. However, this problem is solvable.

How to develop the right design?

You can use the following options:

Place the washing machine under the sink. In old-style houses, the design does not provide for the installation of a washing machine. For this reason, residents are forced to show real miracles of ingenuity. It is convenient to place washing machines under flat sinks. However, in this case, the sink may be located unnecessarily high.

In the event that the sink is too high, a good option would be to raise the floor (except where the machine is installed) by 5-7 centimeters. In this case, it will be convenient to use the sink, and the washing machine will not clutter up the space.

Put the washing machine next to the sink. For harmony, it is better to combine them with one countertop. In order to visually expand the space, a large mirror will be properly hung above the countertop.

If the bathroom has a niche, then this space must be used 100%. For example, put a washing machine there, and use the rest of the space for storing small things.

In addition, you can increase the free space in the bathroom to fit a washing machine. For example, install a shower instead of a bath. Often a bath takes up half the area of the bathroom, and the smallest size of the shower is 80 by 80 centimeters. In the freed space, you can place a washing machine, lockers, a laundry basket, etc.

Let us consider in more detail the first option, with the installation of the machine under the sink. It should be said that this is an extreme case of expanding the space and should only be used if other options for installing the machine in the bathroom are in no way suitable.

Ideally you should do the following

Buy a special sink - a water lily. Its dimensions must be at least 60 by 60 centimeters.
Pick up the machine exactly the size that is ideal to place it under the sink. Often washing machines and sinks - water lilies are sold in one set. In this case, the purchase will be much cheaper than if you buy the sink and the machine separately.

In addition, it is very important to choose the right washing machine. Nowadays, household appliances are on sale especially for apartments of small dimensions. There are not very many such models, but if you wish, you can find everything. You should not buy a narrow top-loading or front-loading washing machine. Nobody argues that such a machine will leave a lot of free space, but it will be very difficult to load laundry into it, select the correct mode and turn it on. When placing the washer under the sink, it is very important that the washbasin drain does not fall on the washer. In this case, even if an emergency occurs and the sink is completely filled with water, the washing machine will not suffer.

If the sink is located at a height of, say, 80 cm, then you should look at miniature machines, from 67 to 72 cm. Such devices do not wash so many things at a time, about 3 kg, but the number of revolutions in the spin mode makes it possible for her to squeeze out clean things practically dry. In other words, the small machine does not have such high performance (it is not suitable for a large family), but it has many advantages. In particular, its small size.

Washing machines under the sink can be equipped with such important devices as a valve that controls the flow of powder and scales for linen and detergent. It is important to note that small models of machines wash just as well as standard-sized machines.

In addition, it is not necessary to place the washing machine in the bathroom. Particularly resourceful owners of small apartments cut down a special niche for this technique between the bathroom and toilet, or even transfer it to the hallway and hide it in the closet.

True, when choosing the last method of storing a washing machine, special attention should be paid to it. After each wash, just in case, turn off the water supply and close the doors so that it dries completely, because. Excess moisture in the closet will not lead to anything good.

Washing machines in the kitchen

In conclusion, let's say that the washing process itself in small-sized machines takes place in the same way as in large ones. You need to load things into the drum, pour in washing powder, select a washing program and press the button. The rest of the machine - "baby" will do itself. The degree of efficiency of small-sized washing machines is divided in the same way as for large-sized ones, from A to G. Moreover, A is the most efficient washing machine. In addition, the effectiveness depends on the person who uses the machine, on the cleaning agent and on the selected mode. Only practice will help you figure this out.

Washing machine prices depend on their technical characteristics, not size. That is, small sizes do not always indicate a small price. . Often "babies" are even more expensive than standard cars.

Tags:

The bathroom is a very important room for every inhabitant of the apartment, as it is not only a place for sanitary and hygienic procedures and a place of relaxation, but also a room where such household tasks as washing and washing large items are solved.

Fortunately, these functions in most modern homes are assigned to household appliances. This article will tell you how to design a bathroom with a washing machine with a shortage of free space.

Pros of accommodation

The bathroom of typical Soviet high-rise buildings has a very modest size, so it is rather difficult to place an additional household appliance there, especially if it is of such a large size. It is for this reason that most homeowners install a washing machine in the kitchen or other areas.

However, placing household appliances intended for washing is much more convenient in the bathroom, and here's why:

Firstly, taking off dirty clothes before washing, it is much more convenient to send them directly to the machine, simplifying the process.
Secondly, the floor of the bathroom is always equipped with powerful waterproofing, so if the machine breaks down, the water will not leak, but lingers inside the room, localizing the disaster in a small area.
Thirdly, installing a washing machine in the bathroom saves the time spent by the hostess on washing.

Note! If you are buying a new open-plan apartment or building your own house, it would be more rational to provide a separate utility room for the placement of the washing machine and dryer near the bathroom, the floor of which will also be waterproofed.

Placement methods

In the interior of the bathroom, the washing machine can look bulky due to its large size, if you do not think about how to rationally place it. But modern compact models of household appliances with different types of loading and custom-made bathroom furniture can effectively solve this problem. There are several options for installing the "washer":

Designers offer an interesting idea - to install a washing machine under the countertop, on which the sink is located. This option for placing household appliances is good because it does not require the transfer of sewer outlets, and also significantly saves space.

Space saving tricks

To clean the washing machine in the bathroom, its design must be functional and ergonomic. To make the space visually more spacious and bright, despite the installation of large household appliances, you need good lighting and clear zoning of the room. Experienced designers recommend several tricks to help free up space in the bathroom for a washing machine:

Important! There are 2 conditions for the safe operation of the washing machine in the bathroom - grounding and waterproofing the floor. Remember these rules and your life will become much easier.

Video instruction

The correct operation of the washing machine largely depends on how well the installation is done. An incorrectly chosen place or connection in violation of the instructions can lead not only to damage to equipment, but also to electric shock to households, which is much more serious. In terms of operation, the bathroom is the most suitable room for a washing machine, although high humidity and the dimensions of the room make their own adjustments during installation.

Regardless of the size and design of the bathroom, when choosing a place for a typewriter, it is worth observing several important conditions:

the washing machine should be located as close as possible to the plumbing, sewerage and electrical outlet. Of course, you can lay additional pipes and make another outlet if necessary, but this increases the cost of repairs, besides, it requires certain skills;
the body of the machine must be reliably protected from splashes and steam. The increased humidity of the washing machine is not terrible, but within reasonable limits, if splashes from the washbasin or bathtub are constantly flying at it, then no equipment will survive;
the machine must not be subjected to mechanical stress. That is, you can’t squeeze the case on the sides or put something on top - all this disrupts the normal operation of the household appliance and leads to breakdowns;
the washing machine should not interfere with free movement in the bathroom. This not only causes certain inconveniences, but also increases the risk of mechanical damage to the case.

If the bathroom is spacious, installation problems do not arise. Under the machine, you can take any free corner or area against the wall. A popular placement option is in a separate niche or box with shelves for bathroom accessories.

In small bathrooms, the washing machine is most often located under the countertop with a sink, and for the smallest rooms, the option of installing the machine under a special-shaped sink called a “water lily” is optimal. Its bowl is very compact and does not extend beyond the body of the machine, which allows you to save space in the room as much as possible.

Washing machines

Preparing for installation

Having determined the place for the typewriter, you should check the condition of the walls and flooring. All surfaces must be strong, dry and even to ensure normal operating conditions for household appliances. If the floor is uneven, the vibrations during the operation of the washing machine will increase significantly, which will lead to rapid wear of the appliance elements. And dampness from the walls will contribute to the corrosion of metal parts in the machine, which also affects the service life.

So, you need to carefully examine the walls and floor, check the plane with a level, make sure there are no cracks and voids. If mold is found in the seams, you need to treat them with a chlorine-containing agent or a special antifungal drug. At the same stage, you should consider ways to connect to the water supply and sewerage, inspect the pipes, and take accurate measurements so that the washing machine immediately falls into place.

You need to prepare an electrical outlet in advance. Wiring must be stationary, extension cords are highly undesirable. For safety reasons, the socket must be a three-wire 16 amp, ceramic, with mandatory grounding. You need to connect it directly to the shield, at the same time installing a circuit breaker. Before connecting, make sure that the ground wire is carefully insulated.

The next stage is the preparation of communication outputs. It all depends on the connection method, so check out all the options first and choose the most suitable for your bathroom.

Ways to connect to the plumbing system

To connect to the water supply, several different methods are used. The choice of the most suitable option depends, first of all, on the experience and skills of the person involved in the connection.

Connection to a metal pipe

This method is a tie-in directly into the water supply and is carried out using a mortise clamp, or a compression sleeve. In the upper part of this device there is a threaded hole through which a hose is attached to draw water from the plumbing system.

Together with the coupling there is a guide sleeve and a rectangular rubber gasket. How the tie-in is performed:

close the mixers and close the valve on the riser;
the section of the pipe under the gasket is cleaned of paint in any convenient way and polished to smoothness;
a sleeve is inserted into the clamp and fixed in the cutout of the gasket;
put the clamp on the pipe with four bolts and begin to tighten them in turn until the gasket is firmly pressed against the pipe;
a pipe wall is drilled through a hole in the clamp with a drill, the drill diameter is 6-8 mm.

Now you need to substitute something, any container, under the clamp, and very slowly turn the valve on the mixer. After that, the water that was in the pipe will pour out of the hole. If you open the faucet abruptly, water can spurt out and flood everything around. When the water drains, you need to carefully clean the hole in the pipe from chips, fix the new faucet and check for leaks.

Advice. If the pipes are not metal, but metal-plastic, a special tee is used instead of a clamp - a fitting. Installation is quite simple: the water is shut off, a fitting is applied and cut points are marked, a piece of pipe is cut out. A fitting with gaskets is inserted into the resulting opening, a ball valve is connected.

Mixer connection

This option provides for the installation between the mixer and the eccentric of the valve. As a rule, the faucet is equipped with a special hose extension for hot water. This connection method is quite popular, because it does not require much effort and time, however, due to the fact that the design with the outgoing hose is in sight, it does not look very aesthetically pleasing.

If a European-style mixer, the connection will take a few minutes: disconnect the cold water supply hose, screw a tee tap onto the eccentric, connect the mixer hose to one hole, and the hose from the washing machine to the other. If the mixer is of domestic production, then after disconnecting it, you need to unscrew the eccentrics and install a passage valve with an extension cord.

Connection to taps to a tank or mixer

The most practical and convenient way. Taps are mounted on pipe-hose connections used to supply water to a flush tank, water heater or mixer. The faucet for the car is usually installed between the water pipe and the faucet for the tank or mixer, although here its position does not play a special role, and can be placed on either side. But if the connection is made in the zone of the water heater, the through tap is mounted only between the pipe and the tap, otherwise, when the hot water is turned off, it will not be possible to wash the laundry.

How the connection is made:

shut off the water;
unscrew the tap on the cold water supply;
they take a tee tap, wind the FUM tape on the external thread and screw it instead of the removed tap;
a mixer hose is connected to one hole of the passage tap, and a hose from the washing machine is connected to the other.

Ways to connect to a drain pipe

Connecting to the sewer is not much more difficult than to the plumbing system, the main thing is to follow the instructions exactly. There are also three different ways here, and which one to choose is up to you.

Drain in plumbing

Not the most convenient, but the easiest option. A horseshoe-shaped plastic hose holder is always included with the machine. After the washing machine is installed, this element is attached to the side of the plumbing, and the free end of the hose is threaded into it. Dirty water is sent through the hose either into the bath or into the toilet, depending on where the holder is fixed, and descends through the drain hole.

There is one plus here - you do not need to spend time and effort connecting the drain. But there are many more cons:

if the holder is loosely fixed, the hose will fall under the pressure of water and flood the floor;
while the water is draining, it is not possible to use plumbing;
the choice of a place for a household appliance is limited by the length of the hose and the distance from the bath or toilet;
plumbing will have to be cleaned much more often due to sediment containing the smallest villi, grains of sand and other impurities.

Draining through a siphon

If the machine is located next to the washbasin, you can connect the drain to the siphon. To do this, you need to buy a siphon with an additional pipe and install it instead of the usual one. After that, it remains only to connect the hose tip to the nozzle. Since the inlet is located at the top of the siphon and at an angle, the drains from the washbasin cannot enter the drain hose.

As for the cons:

the smell of sewerage can penetrate through the hose, therefore, when connecting, it is advisable to use a system with a water seal;
with strong pressure, the water from the washing machine may not go into the sewer, but rise through the pipe into the sink and pour over the edge.

Drain into the sewer

The arrangement of the drain directly into the sewer pipe is the most reliable, although rather laborious. To connect, you will need a tee of the appropriate diameter with an oblique outlet and a check valve for the washing machine (anti-siphon). One side of the check valve is attached to the drain hose, the other is connected through a tee to the sewer pipe.

How to install a washing machine

Advice. The drain hose entry must be angled from top to bottom. If it is made horizontally, drains from the sink and bathtub will definitely fall into the hose, spreading an unpleasant odor.

Washing machine installation

Before starting the installation, the washing machine is released from the packaging, inspected to check the integrity, and the locking bolts are removed. They are installed by the manufacturer at the factory and are intended to fix the drum during transportation. But you can’t leave them in the car after installation, as this leads to a breakdown of the chassis. The bolts are twisted with an open-end wrench and removed from the body along with plastic bushings, and the plugs included in the kit are inserted into the holes.

Now you can start installation.

Step 1. The washing machine is placed in the chosen place, the level is placed on the top cover, the height is adjusted with the help of the legs. The machine should stand level, without distortions, not too close to the wall. On the sides, there should also be at least small gaps between the walls of the machine and furniture or plumbing.

Inlet hose connection

Step 4 Connect the drain hose next: insert its end into the drain hole and tighten the nut tightly. The length of this hose must not exceed 4 m in order to ensure the normal drainage of used water.

Step 5 Both hoses are filled into the corresponding recesses on the back of the machine to prevent kinks. After that, the washing machine is installed in a permanent place and the location is again checked by level. Now it remains only to connect the washing machine to the outlet and check its operation in test mode.

First you need to take the passport of the device and put it in front of you in order to check the data during the verification process. A test run is carried out without loading laundry, with only water and a small amount of powder. So, they turn on the water supply to the tank of the machine, while recording the filling time to the specified mark. Immediately after this, all connections are inspected, and if a leak is detected, the water is drained and the problematic connection is sealed again. If no leaks are visible, you can turn on the machine.

The water should heat up to the desired temperature within 5-7 minutes, so note the time and check with the device's passport. While the water is heating, listen carefully: the device should work almost silently, and any rustles, creaks, knocks indicate a malfunction. If there are no extraneous sounds, check the operation of other functions, including the drain. After turning off the machine, once again inspect the hoses, connections, floor around the body. Everything must be dry and clean.

Video - Installing a washing machine in the bathroom

Video - Connecting the washing machine to the water supply

Video - Connecting a washing machine to a siphon

Every owner of an apartment wants his bathroom to be equipped as functionally and beautifully as possible.

There is enough free space left.

That is why it is necessary to install the washing machine correctly.

And in a small bathroom, this is quite problematic. The layout plays a major role in the design decision, but if the area is small, it is difficult to create something unusual.

Most people think that a washing machine in a small bathroom can be placed either under the sink or in front of it.

But that's not the case at all. If you look at it from the other side, you can easily put the washing machine in a small area.

Of course, do not forget that even the most ergonomic way will not completely hide the machine, because with a small area, it will still take up enough space.

Design moves and precautions

As in any room of an apartment or house, there are basic principles for arranging furniture. In the bathroom, they are similar, but not based on the traditions of Feng Shui.

A practical approach based on common sense is important here. The shower cabin in the bath should be as close to the wall as possible.

If, for example, you put the bath in the center, as modern designers recommend, then there will be no space at all for all other things in the room.

Do not forget about ensuring safe operation in the bathroom and pay special attention to it. There is no leniency in resolving these issues.

After all, even an ordinary slippery floor can pose a threat to the health of the residents of the apartment.

For this reason, when installing a washing machine in the bathroom, everything must be taken into account so that in the smallest area there are convenient and safe ways to approach any technique.

Currently, on the Internet, you can find various locations of photos of the washing machine in the bathroom.

This is quite convenient and simple, because based on the picture, you can arrange everything in your apartment in the same way.

But such examples of installing a machine may not always be safe for owners.

Therefore, before repeating design ideas from the Internet, make sure that this arrangement of furniture will not cause injury to a person.

For example, if you hang a cabinet on the wall near the washing machine, then when the door is open, someone will definitely hit it.

Therefore, think carefully whether it is worth embodying such an example in your own.

The washing machine in the bathroom should be placed in such a way that after putting things into it, the owner, when getting up, does not hurt himself on the sink or washbasin.

The place should be chosen so that the laying of the linen is convenient enough.

What is the type of machine?

In Russia, the current range of household appliances consists mainly of front-loading or horizontal-loading washing machines.

In a small bathroom, a machine with a vertical door is the best choice.

If you purchase such a model, it will make the process of choosing a place for a washing machine in a small bathroom half easier.

The washing machine is placed near the wall so that the owner standing nearby can easily use it.

If you have made your choice in favor of a horizontal type of machine, then it is best to buy a narrow one not exceeding 40 cm in size.

The most comfortable place for her will also be near the wall, a photo of a washing machine in the bathroom.

If you wanted to place the typewriter in the middle or in the corner, then the space will not be entirely harmonious and will simply look out of place.

Also, do not forget to pay attention to the location of electrical wires and water pipes, they should not be stretched, because this affects the safety of the residents of the apartment and the life of household appliances.

A convenient place for the typewriter is the space under the sink. This option is no less good and is suitable for front-loading models.

Washing machine under the sink in the bathroom will save space. Do not forget about the overall interior, because the machine should not differ from other things.

When choosing a washbasin, consider its shape in order to avoid future injuries.

The location of the washing machine closely interacts with the existing communications and plumbing.

When choosing a place, consider all the nuances, the connection to the water supply, the distance to the pipes, the power grid and much more.

It is important that the “washer” does not touch the bathroom, radiators, water and heating pipes in any way.

Following these tips will help avoid electrical shorts.

Little tricks

Nowadays, embedding appliances into furniture has become popular. But this is a rather costly solution, which is carried out according to individual sizes.

But the washing machine in the bathroom in the closet is a perfect example.

When installing under the sink, you can buy a countertop from various raw materials. Marble will be very durable, and from chipboard the most budgetary.