A small cottage is good because it allows you to significantly save on building a foundation, the price of which, as is known, is about 30% of the cost of building an entire house. Compact house often has one floor, which means you don’t have to go up and down dozens of times a day. Such 10 by 10 house projects are especially relevant for families with small children or elderly relatives.

A small building provides a lot of options for decorating your home in the style you like. You can choose among hundreds of layouts - from classic to the most original. However, it is important to remember here that 10 by 10 house designs have usable area less than 100 sq. m. After all, part of it will be occupied by walls, storage rooms, closets. An attic, bay windows, balconies and other architectural nuances will help to slightly increase the usable area.

How to choose the optimal home layout

Certain requirements apply to the design of a house. For example, inner space should be divided into day and night zones. On the ground floor there is usually a day area - hallway, kitchen, dining room, living room. Sometimes a guest room or study is added to them. On the second floor, 10 by 10 house designs usually provide two or three bedrooms and a dressing room. With this layout, there are usually two bathrooms - one on each floor. There is only one riser, that is, the bathrooms are located under each other, and the kitchen is located across the wall from the lower one. Another important nuance– the boiler room should be located as close to the kitchen as possible. Then you will need gas pipe shorter length.

It is worth noting that choosing a suitable project is a very responsible task. After all, later changing something will no longer be possible or will cost a lot of effort and money. In addition, it is very important to immediately decide on the construction material, since 10 by 10 house designs involve the use of almost any materials, from wood and brick to frame technologies.

Construction of a house from aerated concrete is considered one of the most economical options private construction, based on low level cost of foam materials. But the construction of the box is only 30% of all work.

A huge part of the funds is allocated to the construction of the roof and finishing. It all depends on the complexity and intricacy of the project, the chosen type of foundation and roofing material, finishing works and progressiveness of building materials, number of storeys, total area and other structural features.

Estimate for the construction of a house made of aerated concrete 10x10

A 10x10 meter house can be one-story, with an attic (f.1) or built on two floors (f.2). Such a building can easily accommodate a family of 4-6 people on its territory. Let's try not to miss any important points when creating an estimate for the construction of a house made of 10x10 aerated concrete. The construction of such a building must be divided into stages in which it is necessary to adhere to manufacturability and the period for the “duration” of the foundation.

1. Site preparation and foundation laying

To perform this type of work, you need to select the type of foundation. Due to the lightness of foam blocks, any type of base will do. The most acceptable is considered to be a strip or monolithic type of foundation with waterproofing of the base (forms 3,4).
The budget for foundation construction consists of:

• conducting survey studies of terrain and soil;
• territory planning with axis breakdown;
• carrying out earthworks(mechanized or manual ditch digging, device sand base with tamper, crushed stone layer);
• installation of formwork;
• construction of a belt of intertwined reinforcement;
• pouring concrete.

Photo 1 - Belt type foundation
Photo 2 - Foundation monolithic slab

Photo 3 - Cottage with attic
Photo 4 - Two-storey house made of aerated concrete

This takes into account the cost of renting formwork and the price of building materials:

• class A500 reinforcement with a diameter of 12-16 mm and d8mm reinforcement for tying or binding wire d6-8 mm;
• concrete;
• waterproofing;
• sand, crushed stone.

When determining the cost of materials, you need to take into account the cost of their delivery and, in some cases, unloading.

2. Construction of the frame

When drawing up an estimate for the construction of a house made of 10x10 aerated concrete, the cost of materials and work on their installation, delivery, and unloading are taken into account. To build a frame, calculate the cost:

• aerated concrete blocks;
• glue;
• work on laying cellular aerated concrete;
• materials for the device reinforced belt or installation of columns;
• metal for window lintels.

IN Lately a popular construction technology is the device monolithic foundation, connected together with corner columns or pylons. For a 10x10m house, the construction of 4 load-bearing columns will be sufficient. They are erected using special sets of column formwork. A 10x10 house with a wall height of 3 meters will occupy 10x4x3 = 120 sq.m of area load-bearing walls excluding openings for windows and doors. Suitable for construction are gas blocks with a density of D500 and a thickness of 375 mm. For partition walls, use blocks with a smaller thickness. Knowing the block sizes that are offered best manufacturer, you can count the number required material. The amount of glue is determined based on the manufacturer's recommendations.

Photo 5 - Facing options
Photo 6 - An example of a general estimate for the construction of a 10x10 aerated concrete house

Photo 7 - Sample estimate. Section 1. Foundation
Photo 8 - Sample estimate. Section 3. Walls and partitions

3. Installation of floors

To make the house strong and reliable, it is connected together by a frame. At the bottom, the structure is strengthened by the foundation, on the sides - by columns, and at the top - monolithic ceiling. This technology has proven itself and is today used in private, low-rise construction and in the construction of high-rise buildings and industrial facilities. When planning an estimate for the construction of a house made of 10x10 aerated concrete, you should determine the cost of the floor, which includes:

• formwork for floors;
• fittings and binding wire;
• concrete;
• insulation laid around the perimeter of the building.

An experienced team of builders will complete the monolithic vault quickly and efficiently.

4. Roof installation

The most important and costly step is installing the roof. In connection with the chosen option of hip, hip, multi-gable, dome roof, the cost of materials and components is taken into account. The main components in the estimate are the cost:

• covering material (metal tiles, slate, tiles);
• rafter system;
• components for drainage and other elements;
• structures for chimneys, ventilation;
• nails, screws.

Photo 9 - Sample estimate. Section 3. Walls and partitions
Photo 10 - Sample cost calculation. Section 4. Overlap

Photo 11 - Example of cost calculation. Section 5. Roof
Photo 12 - Example of cost calculation. Section 6. Windows and blind areas

5. Facing

Gas silicate blocks quickly absorb moisture, so experts recommend not delaying external cladding buildings (f.5). It can be done with insulation and facing tiles. You can simply cover the house with plaster and paint it. Therefore, the estimate for cladding includes the cost of:

• external facing material;
• interior plaster with wall and ceiling finishing;
• floor devices;
• windows, doors;
• stairs.

Conclusion

The total amount of expenses received at each stage is called total estimated cost. In practice it is very difficult to “fit” into estimates. In order not to disrupt general calculations, some builders reduce costs where technology allows, directing the required amounts to other areas. Sometimes it is necessary to increase the estimate in agreement with the customer. For clarity, we provide an example of estimated estimates for some of the main sections for the construction of a one-story residential building with an attic with a total area of ​​120 sq.m. (f 6-11). The drawings were made based on the information provided.

Aerated concrete has a cellular structure. For its production, a mixture of lime, cement, quartz sand and water is taken. As a result of the reaction between aluminum powder and lime, hydrogen is formed. This, in turn, creates bubbles that occupy 85% of the block and provide low weight and high strength to the material.

By contacting the SVOD-STROY company, you can order the construction of a house from Aerostone and Bonolit autoclave aerated concrete blocks. They are distinguished by precise geometry and maximum strength. Such cellular blocks They do not require the use of carbide-tipped tools during construction and finishing and are easy to process, drill, saw, etc.

Turnkey aerated block houses are easy to assemble and are identical in comfort to brick cottages. They are convenient for year-round living in the Moscow region. Their main advantages are the possibility of implementation complex projects, affordable cost and reliability.

Differences between aerated concrete and foam concrete

Foam concrete is made from concrete mixture, diluted with special additives. This mixture can be prepared directly on construction site without any certificate.

In contrast, aerated concrete is manufactured in factories. First as a result chemical reaction a mixture is formed, which is strengthened using an autoclave and cut with special strings. At the SVOD-STROY company, the construction of aerated concrete houses is carried out strictly from materials manufactured in accordance with GOST requirements.

Advantages of cottages made of aerated concrete blocks

A house made of aerated concrete blocks needs external insulation and shrinkage within 3-6 months. After this, it can be processed in any way and can be absolutely comfortable for year-round use. Block houses They belong to the middle price segment, but in terms of comfort and durability they are not much inferior to brick structures.

The undeniable advantages of this structure are:

• profitability - the affordable cost of aerated concrete and its lightness, allowing it to be used simple foundations, reduce the total price finished house from blocks and costs for builders' services;
• reliability - strong and durable blocks, subject to compliance construction technologies will serve more than one generation of residents;
• moisture resistance and frost resistance - these characteristics allow you to live in such a house at any time of the year;
• speed of construction - ease of processing determines the speed of installation.

House projects

The company "SVOD-STROY" provides turnkey construction services for houses made of aerated blocks according to standard and individual projects. Since 1997, we have been conducting professional construction of private real estate in Moscow and the Moscow region. We offer the most reasonable prices for materials, labor and architects.

Our catalog contains more than 120 original projects with an area from 65 to 520 m2. Any of them can be modified in accordance with individual wishes. Our specialists in Moscow will advise on projects and prices for houses made of aerated blocks, and will also provide guidance on the timing and work plan.

The geology of the site includes checking and studying the soil, this allows you to optimize the cost of the foundation.

What happens if you don't do geology?

If you ignore this stage, then you can choose the wrong foundation and lose from 1,000,000 rubles on alterations.

10 year warranty on foundation, walls, ceilings and roofing.

Ask an engineer a question

What is included in the Engineering Solution?

Documentation on the location and equipment of all technical rooms, electrical points, water supply, ventilation, gas and sewerage.

What is included in a design solution?

Detailed plan and instructions for the foreman, which displays all necessary steps and technologies in the construction of foundations, walls and roofs.

What is included in the architectural solution?

Creation of a sketch and its 3D image, which shows the location and size of rooms, walls, roofing, furniture, windows and doors.

What will you get after this stage?

All technical and visual documentation. Author's supervision of the construction progress. Our architect and designer will visit the site weekly.

Still have questions? Ask them to an engineer.

Ask an engineer a question

What determines the timing?

The timing depends on the chosen project and material (houses made of logs and timber require time to shrink).

What is "house shrinkage"?

This is a natural process of volume change wooden walls and other parts due to drying of the wood.

Who will build my house?

We have our own staff of certified workers and foremen with at least 5 years of specialized experience. A fleet of construction equipment has been put into operation since 2015. Contracting organizations We don't attract.

Still have questions? Ask them to an engineer.

Ask an engineer a question

I want it like in this picture. You can?

Yes! You can send us any image and we will design and build what you want.

Do you have a designer on your staff?

Currently there are 5 interior designers on staff with a total of 74 years of specialized experience.

What is included in an interior design project?

Drawing up a 3D project by a designer, as well as support and implementation of all finishing works.
We will also produce and supply furniture that suits your lifestyle and taste.